Repairing stone setting

Aquaflame can be used for re-tipping a stone setting. The precision flame can be directed at the claw without damaging other parts of the setting.

Soldering Thin Wire

Smaller tip sizes allow for a small precise flame making Aquaflame machines perfect for this use case.

Annealing

Aquaflame can be used for annealing metal. The no.18 tip will produce a flame large, enough to cover the bar so that the correct annealing process can be achieved.

Soldering medical instruments

Aquaflame is ideal for soldering medical instruments due to its precision and clean flame.

Polishing an internal edge

Aquaflame is ideal for polishing straight or curved edges, internal sections and organic shapes.

Polishing a laser cut edge

Smooth off rough laser-cut edges.

Melting metal in a crucible

Aquaflame can be used for recycling scrap. Here we see metal melting in a crucible.

Soldering bangle components

Using a no.18 tip it is possible to solder large bangle components. The Oxyhydrogen flame is clean and precise resulting in reduced oxidization and easier polishing. The only by-product of Aquaflame is water.

Soldering platinum

Aquaflame is powerful enough to solder platinum. Aquaflame generates a flame at 1850°C so is not hot enough to melt platinum. However, the oxyhydrogen flame will melt easily and medium platinum solder thus allowing the solder to flow into the joint.

Assembling fine filigree work

A variety of tips are available allowing the jeweler to choose from a small precision flame with the no.24 tip or a more powerful flame with the no.18 tip. Our model 1200 which can be used for up to 4 users can use up to a no.17 tip permitting melt ups and annealing work too.

Soldering post to earring

Due to Aqauflame machines being highly precise task such as soldering post to earrings is light work.

Resizing stone set ring

Aquaflame is the perfect tool for jewelers and repair shops. The machine is used worldwide for re-sizing rings of all sizes. The precision flame gives the jeweler complete control of the heat because the different tips control the size of the flame.

Soldering lightweight chain

Aquaflame shows its versatility by easily soldering small lightweight chains. The precision tips allow access to delicate parts without causing damage to other areas. It is possible to change the tips so as to generate a tiny precision flame.

Fishhook Welding

Refrigerator Brazing

Engine Carbon Cleaning

Air Conditioner Welding

Medical Instrument Welding and Brazing

Thermoelectric Couple and Platinum Resistor Leading Wires Welding

Flame Treating Circuit Board Welding

Electric Motor Copper Tube Enameled Wire Brazing

Welding Enameled Wire

Ampoule Bottle Sealing

Soldering Optical Instruments

Soldering optical instruments used for joining wires and optical frames.

Medical Instruments

Used for soldering medical instruments and appliences.

Soldering white metal

White metal has a very low melting point and therefore requires precision in terms of soldering so that other parts are not damaged. Aquaflame produces an extremely precise flame, especially with the no.24 tip allowing easy soldering of white metal parts.

Dental Soldering

Used in dental labs for the construction of dental appliances and also it's used for joining wires, bands springs, and dentures.

Investment Casting Wax

Used for for a number of jointing and cleaning up operations.

Flame polishing acrylic edges

Used for polishing straight, curved & internal edges and shapes.

Solering Small Components

Due to the small and direct flame, AQF can be used for any micro soldering.

Soldering Heavyweight Chain

Aquaflame is powerful enough to solder heavyweight chain. The Model 800 is the bestselling machine for jewellery and will generate 120 litres of gas per hour. Using a no.18 tip it is possible to do large soldering work.

Jewellery Soldering

Used for soldering and melting all types of precious metals.